4 (8 ratings)

Characteristics

  • Anchor
    Allowed
  • Mooring buoys
    Available
  • Anchor stern to
    Unavailable
  • Lines ashore
    Recommended

Type of seabed

  • Sand

Protection against wind & swell

78% — Protection score
Sunny
12.3°C
14°C
Wind
  • Speed : 3 knots
  • South (185°)
Swell
  • Height : 0.2 m
  • South (170°)

Reachable by dinghy

  • Beach
    Available
  • Snack
    Available
  • Water
    Unavailable
  • Dock
    Unavailable

Information on mooring buoys

  • Phone
  • VHF channel
  • Length
  • Seasonal
  • No
    Guest buoys
  • Number of buoys

User reviews (8 ratings)

  • Sailors
    Sailors — 09/09/2017
    Lucipara 2 | Sailboat — 14.2 m

    Due to current and depth, it is advised to take lines ashore.

    Due to current and depth, it is advised to take lines ashore.

  • Johan — 08/09/2017
    Nimrod | Sailboat — 12 m

    Anchor between the islands. Very sheltered from swell. Moorings buoys are for restaurant guests only.

    Anchor between the islands. Very sheltered from swell. Moorings buoys are for restaurant guests only.

  • Dean
    Dean — 07/09/2019
    UBIQUITY | Sailboat — 18 m

    We anchored in the middle of the channel. 7m good holding. There are 3 nights in a mix of weather conditions. Boats in the middle are influenced by wind and current whereas those in the corner are only by wind. This can have yachts pointing in different direction. As long as you are either well in the corner or in the channel there is no concern. We saw a few boats with lines ashore. I wouldn't recommend it as there is a lot of beam pressure with the current.

    We anchored in the middle of the channel. 7m good holding. There are 3 nights in a mix of weather conditions. Boats in the middle are influenced by wind and current whereas those in the corner are only by wind. This can have yachts pointing in different direction. As long as you are either well in the corner or in the channel there is no concern. We saw a few boats with lines ashore. I wouldn't recommend it as there is a lot of beam pressure with the current.

See more comments >